Electronics series, July 2010
This series of posts describes how I built an LED-based analog clock which is described and shown briefly in the first post. This is currently a work in progress, but the following posts have been written thus far:
- Destination: Robot?
- Microcontrollers: a look at hardware
- Architecture of the AVR
- Microcontroller programming: initial setup
Subscribe to the RSS feed or check back often for updates!
July 16, 2010 at 22:37 |
[...] Note: This article is the 1st in a series of posts about electronics. [...]
July 16, 2010 at 22:38 |
[...] Note: This article is the 2nd in a series of posts about electronics. [...]
July 17, 2010 at 01:12 |
[...] Note: This article is the 3rd in a series of posts about electronics. [...]
July 19, 2010 at 23:49 |
[...] Note: This article is the 4th in a series of posts about electronics. [...]